Skip to main content
Get your brand new Wikispaces Classroom now
and do "back to school" in style.
Pages and Files
list of experiments
Solubility book (3rd Edn)
Lacey Condron with Lizzie Clark
To determine the solubility of
-cinnamic acid in acetone using the density method. The additivity of volumes is an
and the density of the solute is obtained from ChemSpider.
Acetone solution was obtained, volumetric flask was weighed (20.2670 g) and the weight of 25 ml of acetone solution (19.6767 g) was obtained from electronic balance. Contents of flask was transferred to 100 ml beaker. An excess amount of solvent was added to the 100 mL beaker making approximately 30 mL of solvent. The amount of Cinnamic acid was previously calculated using the predicted value plus 33%-
. Cinnamic acid (10.55 g) was added using a microspatula measured at 20.9 degrees C. After the cinnamic acid was added, the beaker was covered with parafilm to avoid spilling, contamination and vaporization of the liquid.The beaker was placed in a hot water bath (tap water) at 45 degrees C to allow the solute to fully dissolve.The beaker was swirled periodically to assist in dissolving the solute. After the Cinnamic acid was all dissolved, the beaker was placed in a 25.2 degrees C water bath. This allowed the beaker to cool and begin to form crystals. After sitting for approximately 10 minutes crystals began forming. The flask was weighed with the stopper (22.7780 g) at 25.5 degrees C. 25 mL of the supernatant liquid was pipetted into the 25 mL volumetric flask and the stopper was put back in. The weight of the volumetric flask, supernatant, and the stopper was obtained (44.1940 g). More crystals formed on the bottom of the volumetric flask which was a result of the solution being slightly cooled when being transferred from the 25.5 degree C water bath, to the balance.
The concentration of the saturated sample is 1.273 M at 25.5 degrees C.
9:02 - Weighed 25 mL volumetric flask (20.2670 g).
9:05 - Pipetted 25 mL of acetone into 25 mL volumetric flask. Weighed 25 mL of acetone (19.6767 g).
9:09 - Poured the previously weighed 25 mL of acetone into 100 mL beaker along with 5 extra mL of solvent. Weighed/ added cinnamic acid (10.5506 g)
at 20.9 degrees C.
9:42 - Placed beaker in 45 degrees C water bath using tap water.
9:47 Swirled the beaker periodically. Water bath maintained temperature between 40-45 degrees C.
10:00 - All Cinnamic acid is dissolved, placed beaker in 25.2 degrees C water bath to allow time for crystals to form.
10:10 - Noticed crystals forming
10:51 - Measured weight of flask plus stopper (same flask as used to measure the pure solvent). (22.7780g)
10:52 - Noted temperature of water bath 25.5C
11:08 - Pipetted 25mL of supernatant into volumetric flask and put back stopper.
11:21 - weight volumetric flask plus supernatant and stopper, some crystals had formed on the bottom of the volumetric flask. (44.1940g)
help on how to format text
Turn off "Getting Started"